ELCAB ENGINEERS PRIVATE LIMITED
Bengaluru, Karnataka
SEND SMS
SEND EMAIL

Prok Dvs Products

Our range of products include 300ma-12a microprocessor based digital elr, 30ma-30a microprocessor based digital elr, 300ma-30a microprocessor based digital elr, 5%-80% microprocessor based digital efr, 5%-80% microprocessor based static efr and numerical draw-out 2 over current & 1 earth fault.

300mA-12A Microprocessor Based Digital ELR

300mA-12A Microprocessor Based Digital ELR
  • 300mA-12A Microprocessor Based Digital ELR
Get Best Quote
Approx. Price: Rs 3,000 / PieceGet Latest Price

Product Details:

BrandProk dv's
Current Setting Range300mA-12A
Tripping Time0.0Sec - 5Sec (in steps of 0.05 sec)
Device ID1 - 30 (For models with com port)
Rated Frequency50Hz / 60Hz
Auxiliary Voltage85 - 275 V AC / DC L - L 380V,440V,550V
Panel Cut Out90mmX90mm + 2 mm (For Flush Type only)

Earth Leakage Current give rise to generation of heat and result in progressive failure of insulation, which leads to earth faults sparking flashovers, deterioration of earthing and finally
results into catastrophic fires which destroys costly equipments, gadgets and precious lives. It is therefore essential to detect earth leakage current well before they cross the threshold
limits and isolate the circuit in the event of leakages.

Prok dv's make Digital microprocessor/microcontroller based Earth Leakage Relays (ELR) with Core Balance Current Transformer (CBCT / ZCT) are used to detect leakage currents in electrical power systems. ELR transmits a signal to activate the trip coil of the MCCB/ACB/OCB/CONTACTOR in the event of earth leakage resulting in automatic isolatio  of the load. ELR have been widely used and accepted because of field adaptability and
are economic.


Features:

  • Microcontroller based compact design.
  • Continuous monitoring and display of set value and measured value of leakage current.
  • 8 character 2line LCD displays with back lit.
  • Test & Reset facility.
  • CBCT connection monitoring facility
  • True Rms measurement of leakage current.
  • Trip Circuit Failure indication (Optional) Default:Disabled
  • Serial RS 485 communication port with modbus protocol (optional)
  • Fault recording with date and time stampings, max up to 10 Faults (optional)
  • Tropicalised and rugged design.
  • External test, reset, fault & healthy indication suitable for mining

Application:
  • Frame leakage protection for LT control panels and switchboards.
  • Earth leakage protection for feeders. /motors/generators/transformers/mobile operating equipments.
  • Protection for hazardous sensitive environments like oil refineries/chemical platform/pulp industries and general electrical distribution also where drives and soft starters are used.
  • Protection for mining and control engineering.
  • Protection for Marine and control engineering.
Request
Callback


Additional Information:

  • Item Code: MPEL01
Yes! I am Interested
View PDF

30mA-30A Microprocessor Based Digital ELR

30mA-30A Microprocessor Based Digital ELR
  • 30mA-30A Microprocessor Based Digital ELR
Get Best Quote
Approx. Price: Rs 4,200 / UnitGet Latest Price

Product Details:

BrandProk dv's
Tripping Time0.0 Sec-5 Sec,Step size- 0.05Sec.
Auxiliary Voltage85-275V AC/DC,415V & 550V. AC
MountingFlush / Din
DimensionFlush 96 x 96 x 70mm Din80 x 94 x 76mm ( W x H x D )
Current Setting Range300mA-12A -( MPEL-01 ),30mA-3.0 A - ( MPEL-02) (18- steps .)

Installation Procedure For Earth Leakage Relay Cbct:

Check the sensitivity of Earth Leakage Relay and also the inner diameter of core balance current transformer.

The Serial No. of the ELR and CBCT should match for better performance (the performance shall be guaranteed if the serial no. of the ELR and CBCT are matched).

Check the Auxiliary Supply of ELR and proper Voltage i.e. the rated Auxiliary Voltage.

The ELR have one pair of potential free change over contact for tripping purpose. Use rated current and rated voltage (refer the specification of our product). One pair of change over contact i.e., N/O Contact and N/C Contact can be used depending upon the tripping management.


Features:

Digital Microprocessor / Microcontroller based compact design.

Continuous monitoring and display of set value and measured value of leakage current.

8 character 2 line LCD displays with back-lit.

Test & Reset facility.

CBCT / ZCT connection monitoring facility.

True RMS measurement of leakage current.

Trip Circuit Failure indication.

Immune to harmonics and transients.

Serial RS. 485 communication port with Modbus Protocol (optional).

Tropicalized and rugged design.

Transducer Output- (4 mA-20mA) (optional).

External Test, Reset, Fault & Healthy indication suitable for Mining application.


Applications:

Frame leakage protection for LT control panels and switchboards

Earth leakage protection for feeders

Protection for hazardous sensitive environments like oil refineries/chemical platform/pulp industries and general electrical distribution also where drives and soft starters are used.

Protection for mining and control engineering

Protection for Marine and control engineering

Request
Callback


Additional Information:

  • Item Code: MPELSPL01
Yes! I am Interested
View PDF

300mA-30A Microprocessor Based Digital ELR

300mA-30A Microprocessor Based Digital ELR
  • 300mA-30A Microprocessor Based Digital ELR
Get Best Quote
Approx. Price: Rs 4,200 / UnitGet Latest Price

Product Details:

BrandProk dv's
Tripping Time0.0 Sec-5 Sec,Step size- 0.05Sec.
Auxiliary Voltage85-275V AC/DC 415V & 550V. AC
Contact Rating8A 250V AC/ 8A 30V DC 2C/O
DimensionFlush 96 x 96 x 70mm Din80 x 94 x 76mm ( W x H x D )
Current Setting Range300mA-12A -( MPEL-01 ),30mA-3.0 A - ( MPEL-02) (18- steps .)

The rise of leakage current in Electrical Power Distribution are quite dangerous, resulting in Electrical hazards and catastrophe. Leakage Current are due to deterioration of insulations, negligence of wire man, Bad wiring, Inferior / substandard usage of Electrical Materials , ageing or endurance of Electrical environment. First and foremost importance should be given for the proper earthing of electrical net work-system. Most of the Industries, Commercial establishment and domestic application the earthing of electrical system is ignored and improper maintenance of the same. The Earth Leakage Current are very low and are sensitive leakage current can be detected by Earth Leakage Relay and core balance current transformer. ELR detects the Leakage Current in the circuit and isolate the power supply by switching off the tripping device (circuit breaker / contactor etc).

Features:

Microcontroller based compact design

Continuous monitoring and display of set value and measured value of leakage current

8 character 2line LCD displays with back lit

Test & Reset facility

CBCT connection monitoring facility

True Rms measurement of leakage current

Trip Circuit Failure indication (Optional) Default:Disabled

Serial RS 485 communication port with modbus protocol (optional)

Fault recording with date and time stampings, max up to 10 Faults (optional)

Tropicalised and rugged design

External test, reset, fault & healthy indication suitable for mining Application

High sensitive leakage current setting (5mA to 1.00A) (MODEL:MPELSPL)


Applications:

Frame leakage protection for LT control panels and switch boards.

Earth Leakage protection for Feeders / Motors / Generators / Transformers / Mobile Operating Equipments.

Protection for hazardous sensitive environments like Oil Refineries/Cement Plant/Chemical

Plant/Steel Plant / Pulp Industries and General Electrical Distribution.

Protection for Mining and Control Engineering

Request
Callback


Additional Information:

  • Item Code: DMPEL01
Yes! I am Interested
View PDF

5%-80% Microprocessor Based Digital EFR

5%-80% Microprocessor Based Digital EFR
  • 5%-80% Microprocessor Based Digital EFR
Get Best Quote
Approx. Price: Rs 3,500 / UnitGet Latest Price

Product Details:

BrandProk dv's
Frequency50Hz
Auxiliary Voltage85-275 V AC/DC or 50-550V AC/DC
High Set(0.5 -16) In.,in steps of 0.1
Time for High Set Operation(0.0 -1.6) Sec. in steps of 0.1 Sec
Contact Capacity8A@250V AC,8A@30V DC

PROK DEVICES PVT LTD an ISO 9001-2008 company introduces Digital Microprocessor / Microcontroller Based Idmt / Definite Time / Instantaneous Earth Fault Relay  (EFR).It is a current sensing device which is tropicalised professionally designed and tested for protection of Generators, Transformers and Feeders. Prok dv's make Digital Microprocessor / Microcontroller Based Idmt / Definite Time / Instantaneous Earth Fault Relay (EFR) can be employed with various earth fault protective schemes, which are explained in brief with figures. The magnitude of the earth fault current depends on the fault impedance and invariably the fault impedance for earth fault is higher than that for phase faults, hence the earth fault current is low compared to the phase fault currents. The fault impedance depends on the system parameter and also on type of earthing. The neutral may be solidly grounded, grounded through resistance or reactance.

Features:
  • Compact
  • IDMT (4 IEC curves), Definite Time & Instantaneous
  • Wide setting ranges
  • Fully digital acquisition & processing of data
  • Wide operating voltages
  • LCD display of operated current & fault current
  • Rugged and Tropicalized design
Request
Callback


Additional Information:

  • Item Code: MPEFSPL01
Yes! I am Interested

5%-80% Microprocessor Based Static EFR

5%-80% Microprocessor Based Static EFR
  • 5%-80% Microprocessor Based Static EFR
Get Best Quote
Approx. Price: Rs 2,500 / PieceGet Latest Price

Product Details:

BrandProk dv's
Frequency50 Hz
Auxiliary Voltage85-275 V/50 V-550 V AC/DC
Rated Current1 A/5A
StandardIEC-60255
Dimension Flush96x96x70 mm,Din 80x95x75 (WxHxD)

Prok dv’s make Definite Time / Instantaneous Static Earth Fault Relay (EFR) is a current sensing device which is tropicalised, professionally designed and tested for protection of Generators, Transformers and Feeders. Prok dv’s make Static Definite Time & Instantaneous Earth Fault Relay (EFR) can be employed with various earth fault protective schemes, which are explained in brief with figures. The magnitude of the earth fault current depends on the fault impedance and invariably the fault impedance for earth fault is higher than that for phase faults, hence the earth fault current is low compared to the phase fault currents. The fault impedance depends on the system parameter and also on type of earthing. The neutral may be solidly grounded, grounded through resistance or reactance.


Features:

  • Static Device
  • Compact, Reliable with Aesthetic Value
  • Rugged, Robust and Tropicalised design
  • Consistent repeat accuracy
  • Wide Current Operating range
  • LED Indication for Healthy & Fault Status
  • Manual Reset & Low Burden on CT Secondary
Request
Callback


Additional Information:

  • Item Code: EFSPL01
Yes! I am Interested

Numerical Draw-Out 2 Over Current & 1 Earth Fault

Numerical Draw-Out 2 Over Current & 1 Earth Fault
  • Numerical Draw-Out 2 Over Current & 1 Earth Fault
Get Best Quote
Approx. Price: Rs 200 / UnitGet Latest Price

Product Details:

BrandProk dv's
Frequency50Hz or 60Hz
Relay Rated Current1A or 5A user selectable (In)
Auxiliary Voltage Range85V - 275V AC/DC,21 - 130V DC
Operating Temperature- 5 deg to +55 deg C
Panel Cut Out151 x 157 mm + 0.1mm

Relay has modbus protocol with RS 485 port with baud rate 9600bps. Another model is established for special applications with baud rate115kbps.Relay records 99 faults with date and time. Relay rating (In) is field selectable- either 1A/5A.The output relays are configurable Configurable options for enabling & disabling of high-set in both Phase & earth.

Features:

Three phase , low-set, non - directional Over current relay with inverse definite minimum time (IDMT) or definite time characteristics

Three phase, high-set, non-directional Over current relay with instantaneous or definite time function

Low-set non -directional Earth fault Relay with inverse definite minimum time (IDMT) or definite time characteristics

High-set non-directional Earth Fault Relay with instantaneous time or definite time function

Password protection

Enabling /Disabling o f High-Set

RS-485 communication port with modbus protocol

High Drop-off/Pick-up ratio

Poly carbonate front cover with external reset switch

Consistent repeat accuracy

Request
Callback


Additional Information:

  • Item Code: PNA422D
Yes! I am Interested
View PDF

Numerical Draw Out 3 Over Current

Numerical Draw Out 3 Over Current
  • Numerical Draw Out 3 Over Current
Get Best Quote
Approx. Price: Rs 2,000 / UnitGet Latest Price

Product Details:

BrandProk dv's
Frequency50Hz or 60Hz
Operating Temperature- 5 deg C +55 deg C
Relay Rated Current1A Or 5A User Selectable (In)
Panel Cut Out151 x 157 mm + 0.1mm
Contact RatingAC 250 V @ 30 AMP,DC 24 V @ 30 AMPS,2 C/O or 3 C/O

PNA Type Idmt/Definite Time/Instantaneous Low-Set/High-Set Directional Numerical/Microprocessor Based Over Current Relay (Oct) With Earth Fault Relay (EFR) receives the input current signals (phase current and neutral current) via four input current transformers. These signals are galvanically de-coupled, suitably filtered and fed to the micro-controller, for amplitude calculation and further logical processing.


Features:
  • Three phase, low-set, non - directional Over current relay with inverse definite minimum time (IDMT) or definite time characteristics
  • Modular Integrated Draw Out System for field adaptability and tropicalised design (MIDOS)
  • RS-485 communication port with modbus protocol
  • Relay test facility with relay trip & without relay trip
  • Separate heavy duly output contacts provided f or time delayed phase fault with high-set and time delayed Earth Fault with high-set
  • Definite time curve for both Phase & Earth along with optional user defined curve.
  • Low AC burden
  • Reliable auxiliary supply of wide range input of 18-85 or 85-275 volts AC or DC
  • Non-Volatile memory for data retention and retrieval in the event of power failure
  • Consistent repeat accuracy
  • High Drop-off/Pick-up ratio
  • Poly carbonate front cover with external reset switch
Request
Callback


Additional Information:

  • Item Code: PNA430D
Yes! I am Interested
View PDF

1-10A Microprocessor Based Din Mount

1-10A Microprocessor Based Din Mount
  • 1-10A Microprocessor Based Din Mount
Get Best Quote
Approx. Price: Rs 2,500 / PieceGet Latest Price

Product Details:

BrandProk dv's
Pick Up Accuracy+/-12.5 %
Dimension70x55x108 mm(WxHxD)
Operating Temperature0 deg C to + 55 deg C
Frequency50/60 Hz
Auxiliary Power Supply85-275 V AC/DC

Prok dv’s make Microcontroller Based Motor Protection Relay PD-MMPR-303 uses the state-of-the-art Microcontroller based measurement techniques for providing protection for Motors up-to 75HP. The comprehensive protection features of the relay make it ideal for Motor protection. The heart of the relay is microcontroller based reliable hardware with special algorithms to calculate the tripping time. The relay continuously monitors the Three Phase Currents to build the thermal replica of the Motor. This thermal replica is used to protect the Motor against Thermal over Loads.


Features:
  • Thermal Over Load Protection
  • Single Phasing /Phase Fail Protection
  • Phase Reversal Protection
  • Unbalance Protection
  • Earth Fault Protection
  • Locked Rotor Protection
  • Under Current Protection
  • Instantaneous Short Circuit protection during Run mode
Request
Callback


Additional Information:

  • Item Code: PDMMPR01
Yes! I am Interested
View PDF

10-32A Microprocessor Based Din Mount

10-32A Microprocessor Based Din Mount
  • 10-32A Microprocessor Based Din Mount
Get Best Quote
Approx. Price: Rs 2,500 / PieceGet Latest Price

Product Details:

BrandProk dv's
Frequency Range50/60 Hz
Auxiliary Power Supply85-275 V AC/DC
Pick up Accuracy+/-12.5 %
Dimension70x55x108 mm(WxHxD)
Operating Temperature0 deg C to + 55 deg C

Prok dv’s make Microcontroller Based Motor Protection Relay PD-MMPR-303 uses the state-of-the-art Microcontroller based measurement techniques for providing protection for Motors up-to 75HP. The comprehensive protection features of the relay make it ideal for Motor protection. The heart of the relay is microcontroller based reliable hardware with special algorithms to calculate the tripping time. The relay continuously monitors the Three Phase Currents to build the thermal replica of the Motor. This thermal replica is used to protect the Motor against Thermal over Loads.
The Microcontroller Based Motor Protection Relay does not require external Current Transformer (CT) for its operation for within the bandwidth of Im ranges. The three phase R, Y and B cables are made to pass through the CT hole which is in the relay. The built in CT’s takes care of stepping down of the Currents to the required level. The stepped down three phase Currents are continuously monitored by the relay to detect any abnormal behavior of the Motor and to make tripping decision.


Features:

  • Accurate and Real Time TRUE RMS measurements
  • Motor Rated Current (Im) Selection by means of Pot meter with markings
  • Earth Fault Setting provided by means of Pot meter with markings
  • Selectable Thermal Trip Time characteristics Class - 10A, 10, 20 & 30
  • I > Thermal over load above105 % of Im - provided through visual led indication
  • Provided the Thermal replica for motor overload condition
  • Continuous monitoring of Motor IDLE/Stop, COLD, WARM, HOT, I> & Various Fault status through visual LED indication
  • Various Models with Current ratings
  • Compact and Reliable
  • Manual TEST / RESET Facility
Request
Callback


Additional Information:

  • Item Code: PDMMPR02
Yes! I am Interested
View PDF

20-64A Microprocessor Based Din Mount

20-64A Microprocessor Based Din Mount
  • 20-64A Microprocessor Based Din Mount
Get Best Quote
Approx. Price: Rs 1,200 / PieceGet Latest Price

Product Details:

BrandProk dv's
Auxiliary Power Supply85-275 V AC/DC
Pick Up Accuracy+/-12.5 %
Current20-64A
Frequency Range50/60 Hz
Dimension70x55x108 mm(WxHxD)
Operating Temperature0 deg C to + 55 deg C

Prok dv’s make Microcontroller Based Motor Protection Relay continuously monitoring Real Time Motor Current of all the Three Phases. When the Motor Current exceeds the set value Im, the relay issues a trip command after the calculated time elapse (Based on selection of trip Class). The relay visually indicating the fault trip status by means of LED’s.
Two Set of potential free output changeover contact is provided in the relay C& NC and C& NO for trip circuit .The relay continuously monitors the Currents and using this data it builds Thermal replica of the Motor and monitoring the Thermal status of the Motor. This information is used to protect the Motor against Thermal over Loading.

Features:

Over Load Current Setting Range 1.0Amps – 96.0Amps in 4 ranges as explained in SL.13

Trip Time Characteristics Class -10A, 10, 20 &30 as per IEC 947-4-1(Default: Trip class 20) if none of the trip class selected by means of Dip switch

Thermal overload pick up above 105 % of Im indication through blinking of TOL led

Provided the Thermal Replica for Motor over load

Thermal overload pick up status I> indicated through visual LED indication

Request
Callback


Additional Information:

  • Item Code: PDMMPR03
Yes! I am Interested
View PDF

Intelligent PF Controller

Intelligent PF Controller
  • Intelligent PF Controller
Get Best Quote
Approx. Price: Rs 10,000 / UnitGet Latest Price

Product Details:

Dimension144 x 144 x 120 mm ( H x W x D)
Aux Supply85-275V AC/DC
Indication16 Character back-lit LCD Display
CT Burden0.25VA
Capacitor Stage4,6,8,10 & 12 stages
Switching Time60 Seconds
Panel Cut Out Size137 x 137 mm

RISC architecture based, intelligent state-of-the-art PNPF Prok dv's make Digital Microcontroller based Intelligent Automatic Power Factor Controller/Regulator/Correction Relay (APFCR) with on-line monitoring of line PF through industrial grade back-lit LCD Display. The Unit uses one of the tried and time tested intelligent algorithms to switch the capacitor banks, in a most optimum combination in a shortest time for any dynamic load conditions without the need to select the complicated switching sequences by the user.

Features:

User entered parameter is stored in non-volatile memory (EEprom)

CT Ratio & System Voltage user selectable through key board display

Independent of Frequency

Most Optimum combination obtained through advanced control programming

RISC architecture dedicated Microcontroller based

Target pf 0.80lag to 0.90 lead selectable through key board display

Auto/Manual mode

No complicated setting procedure

User friendly interface

Request
Callback


Additional Information:

  • Item Code: 416STAGE
Yes! I am Interested
View PDF

Microprocessor Based Under/Over Voltage Relay 4W

Microprocessor Based Under/Over Voltage Relay 4W
  • Microprocessor Based Under/Over Voltage Relay 4W
Get Best Quote
Approx. Price: Rs 4,500 / UnitGet Latest Price

Product Details:

BrandProk dv's
Aux Voltage85 to 275V A C/DC
System Voltage220V230V/240V/250VAC site selectable Un
IndicationDisplay of the Magnitude and nature of fault by LCD an d LED indication for relay trip
Model Dimension144x144x120mm [H x W x D]
Cut Out Dimension137 mmx137mm

Prok dvs make AC Digital Microcontroller Based Definite-Time Under Voltage (UV) and Over Voltage (OV)/ Line Voltage Monitor (LVM) is a microcontroller based voltage monitoring and supervision relay for poly-phase system. It can monitor both under voltage (UV) and over voltage (OV) conditions in the system. Both under voltage (UV) & over voltage (OV) conditions are associated with definite time tripping characteristics. It has wide setting range of operating time on the occurrence of fault condition. Digital Microcontroller Based Definite Time Under Voltage (Uv) And Over Voltage Relay/ Line Voltage Monitor(LVM) provides wide range of time delay for healthy resumption of the operating voltage.


Features:

  • Site selectable system voltage
  • Continuous display of measured voltage parameter
  • 16 character 2 line LCD display with back-lit
  • Accurate reading for balanced and unbalanced load
  • Wide range of auxiliary input for both AC & DC
  • Independent contacts for both Under & Over voltage
  • Self reset & site selectable reset gap
  • Built in fixed instantaneous Under & Over voltage highest trip
  • User friendly setting modes using key pads
  • Low power consumption
  • Tropicalized design using micro controller & Ideal for industrial environment
Request
Callback


Additional Information:

  • Item Code: LVM11
Yes! I am Interested
View PDF

Microprocessor Based Under Voltage Relay 4W

Microprocessor Based Under Voltage Relay 4W
  • Microprocessor Based Under Voltage Relay 4W
Get Best Quote
Approx. Price: Rs 4,500 / UnitGet Latest Price

Product Details:

BrandProk dv's
Aux Voltage85 to 275V A C/DC
IndicationDisplay of the Magnitude and nature of fault by LCD an d LED indication for relay trip
Model Dimension144x144x120mm [H x W x D]
Cut Out Dimension137 mmx137mm
Phase3 Phase 4 Wire,3 Phase 3 Wire

Features:
  • Site selectable system voltage
  • Continuous display of the measured voltage parameter
  • 16 character 2 line LCD display with back-lit
  • Accurate reading for balanced and unbalanced load
  • Wide range of auxiliary input for both AC & DC
  • Independent contacts for both Under & Over voltage
  • Self reset & site selectable reset gap
  • Built in fixed instantaneous Under & Over voltage highest trip
  • User friendly setting modes using key pads
  • Tropicalized design using micro controller & Ideal for industrial environment

Applications:
  • Monitoring & Supervision of Under and Over voltage in power generating plants &
    distribution system
  • To protect Generators & AMF switch boards
  • For protection of synchronous & induction motors
  • For transformer feeder panel
  • Protection for capacitor control panels
Request
Callback


Additional Information:

  • Item Code: LVM02
Yes! I am Interested
View PDF

Microprocessor Based Under Voltage Relay 3W

Microprocessor Based Under Voltage Relay 3W
  • Microprocessor Based Under Voltage Relay 3W
Get Best Quote
Approx. Price: Rs 4,500 / UnitGet Latest Price

Product Details:

BrandProk dv's
Contact Rang1 C/O or 2C/O,6A-230VAC
IndicationDisplay of the Magnitude and nature of fault by LCD an d LED indication for relay trip
Model Dimension144x144x120 mm [H x W x D]
Cut Out Dimension137 mmx137 mm
Aux Voltage85 to 275V A C/DC

All the line voltages are monitored and sensed simultaneously using three independent scale down potential transducer this low level ac signal is subjected to signal condition, which includes surge suppressors and harmonic filter, filtered signal is fed to the ADC of the industrial grade pic micro controller, When the sensing voltage level exceeds the user set value f or under or over voltage, Digital Microcontroller based definite-time under voltage(uv) and over voltage (ov) relay/line voltage monitor(LVM) gives an output signal in the form of relay change over for tripping/alarming.


Features:
  • Site selectable system voltage
  • Continuous display of the measured voltage parameter
  • 16 character 2 line LCD display with back-lit
  • Accurate reading for balanced and unbalanced load
  • Wide range of auxiliary input for both AC & DC
  • Independent contacts for both Under & Over voltage
  • Self reset & site selectable reset gap
  • Built in fixed instantaneous Under & Over voltage highest trip
  • User friendly setting modes using key pads
  • Low power consumption
  • Tropicalized design using micro controller & Ideal for industrial environment 

Applications:

  • Monitoring & Supervision of Under and Over voltage in power generating plants & distribution system
  • To protect Generators & AMF switch boards
  • For protection of synchronous & induction motors
  • For transformer feeder panel
  • Protection for capacitor control panels
Request
Callback


Additional Information:

  • Item Code: LVM02A
Yes! I am Interested
View PDF

Microprocessor Based Digital Relay

Microprocessor Based Digital Relay
  • Microprocessor Based Digital Relay
Get Best Quote
Approx. Price: Rs 2,100 / NumberGet Latest Price

Product Details:

BrandProk dv's
Trip Level4 % - 20 % in Steps of 1%
Delay0 - 20 Sec in Steps of 0.1 Sec
Sensing Voltage Range50 - 500V
Frequency Range40 - 60 Hz
Auxiliary Supply85 - 275 V AC/DC
Rated Current5 Amps

Features:
  • Microcontroller based, hence accurate and precise
  • Protection of Generator / Prime movers against reverse power
  • Display of reverse power on the LCD
  • Continuous display of sensing voltage, current, frequency and power factor with lead/lag indication
  • Wide Auxiliary voltage range from 85–275V AC/DC
  • Cost effective and highly reliable compact design
  • Test Facility, allowing the user to check the NO and NC contacts of the relay

Applications:
  • Protection of Generator and Prime Mover/ Turbine.

Specification:
  • Out put Relay: 2 C/O,250V, 8A AC 30V, 8A DC
  • Operating Temperature: ‐5 deg c to +55 deg C
  • Panel cut out: 137 x 137+0.1mm
  • Enclosure Dimensions: 144 x 144 x 105 mm

Request
Callback


Additional Information:

  • Item Code: REVERSEPOWERRELAY
Yes! I am Interested
View PDF

Phase Failure Relay

Phase Failure Relay
  • Phase Failure Relay
Get Best Quote
Approx. Price: Rs 1,500 / UnitGet Latest Price

Product Details:

BrandProk dv's
Dimensions75x95x75 mm(LxHxD)
System Voltage415VAC 3 Phase 50Hz
Fixed Tripping Me Delay2.5 Sec +/- 0.5 Sec
Unbalance Voltage Setting10% or 20% (user selectable)
Auxiliary Voltage110/220/415 VAC 50 Hz

SStatic Phase Failure (Pfr) Relay / Single Phasing Preventor (SPP) from Prok dv's works on the principle of negative phase sequence voltage detection of the incoming supply. Monitoring of the unbalance in the supply voltage is the proven technique which has been adopted in the Static Phase Failure (Pfr) Relay / Single Phasing Preventor (SPP).


Features:
  • Negative phase sequence detection
  • Low power consumption
  • Selectable percentage unbalance settings
  • Auto/Manual reset operation
  • Fail safe system
  • Accurate, reliable and tropicalised
  • Din Rail/surface mounting type

Applications:
  • Suitable for motors of any HP ratings.
  • Power supply distribution boards.
  • Agriculture pump control panels.
Request
Callback


Additional Information:

  • Item Code: PFR
Yes! I am Interested
View PDF

DIN Mount LV Voltage Relay

DIN Mount LV Voltage Relay
  • DIN Mount LV Voltage Relay
Get Best Quote
Approx. Price: Rs 2,500 / UnitGet Latest Price

Product Details:

BrandProk dv's
System Voltage415VAC +/- 20%, 50Hz
Sensing Aux Voltage110V/230V/415VAC +/- 20%,50Hz
MounngDin rail mounting
Power ConsumptionLess than 4VA
Insulation2KV, 50Hz for 1min

Prok Dvs make Static Over Voltage (Ov) And Under Voltage (Uv) Relay With Phase Failure (Single Phasing) AND PHASE REVERSAL RELAY for protection against under voltages, over voltages, phase failure, phase reversal and unbalance voltages caused due to transients such as inductive load switching and commutation voltage spikes etc. Prok Dvs Make Static Over Voltage (Ov) And Under Voltage (Uv) Relay With Phase Failure (Single Phasing) And Phase Reversal Relay available in five models i.e. VD-02, VD-03, VD-04, VD-05 and VD-06 for various applications. They are provided with fixed or variable voltage settings, auto reset, definite time delay fixed or variable settings.


Features:

  • Solid state circuitry
  • Negative Phase sequence voltage detection
  • Definite fixed or variable time delay
  • Low power consumption
  • Auto reset
  • Fail safe system
  • LED indication for healthy and fault indication
  • DIN rail mounting

Applications:
  • Protection of synchronous and induction motors of any HP rating
  • Protection of generators, AMF switch Boards
  • Transformer feeder panel
  • Distribution boards
  • Voltage regulators
  • Protection f or UPS and single phase applications
Request
Callback


Additional Information:

  • Item Code: VD0233
Yes! I am Interested
View PDF

DIN Mount LV Voltage Relay

DIN Mount LV Voltage Relay
  • DIN Mount LV Voltage Relay
Get Best Quote
Approx. Price: Rs 3,500 / UnitGet Latest Price

Product Details:

BrandProk dv's
System Voltage415VAC +/- 20%,50Hz
Sensing Aux Voltage110V/230V/415VAC +20%,50Hz
Contacts and Rating2 C/O contacts,6A/230VAC/28VDC
MountingDin rail mounng
Insulation2KV, 50Hz f or 1min

In motors operating at low loads, failure of any one phase causes over voltages, which may cause rupture of insulation leading to motor burn out. Low voltage will cause synchronous motors to come out of synchronism at 75% of rated voltage. Induction motors may stop when voltage falls below 70%. Over voltages may occur due to defective voltage regulator, over speeding, caused by sudden drop in load on account of this di-electric property deteriorates. In single phase supply low voltage may cause over load on supply cable and thermal damage to insulation of windings.


Features:

  • Solid state circuitry
  • Negative Phase sequence voltage detection
  • Definite fixed or variable time delay
  • Low power consumption
  • Auto reset
  • Fail safe system

Applications:
  • Protection of synchronous and induction motors of any HP rating
  • Protection of generators, AMF switch Boards
  • Transformer feeder panel
  • Distribution boards
  • Voltage regulators
  • Protection f or UPS and single phase applications
Request
Callback


Additional Information:

  • Item Code: VD0333
Yes! I am Interested
View PDF

LV Voltage Relay

LV Voltage Relay
  • LV Voltage Relay
Get Best Quote
Approx. Price: Rs 800 / PieceGet Latest Price

Product Details:

BrandProk dv's
Contacts and Range2 C/O contacts,6A/230VAC/28VDC
Trip Me Delay100 msec fixed
MountingDin rail mounting
Insulation2KV,50Hz for 1min
Sensing Aux Voltage230VAC+ 20%,50Hz

Prok Dvs make Static Over Voltage (Ov) And Under Voltage (Uv) Relay With Phase Failure (Single Phasing) And Phase Reversal Relay for protection against under voltages, over voltages, phase failure, phase reversal and unbalance voltages caused due to transients such as inductive load switching and commutation voltage spikes etc.
Prok Dvs Make Static Over Voltage (Ov) And Under Voltage (Uv) Relay With Phase Failure (Single Phasing) And Phase Reversal Relay available in five models i.e. VD-02, VD-03, VD-04, VD-05 and VD-06 for various applications. They are provided with fixed or variable voltage settings, auto reset, definite time delay fixed or variable settings.

Features:

Solid state circuitry

Negative Phase sequence voltage detection

Definite fixed or variable time delay

Low power consumption

Auto reset

Fail safe system

LED indication for healthy and fault indication

DIN rail mounting


Applications:

Protection of synchronous and induction motors of any HP rating

Protection of generators, AMF switch Boards

Transformer feeder panel

Distribution boards

Voltage regulators

Protection f or UPS and single phase applications

Request
Callback


Additional Information:

  • Item Code: VD04SP
Yes! I am Interested
View PDF

LV Voltage Relay

LV Voltage Relay
  • LV Voltage Relay
Get Best Quote
Approx. Price: Rs 1,300 / UnitGet Latest Price

Product Details:

BrandProk dv's
System Voltage415VAC +/- 20%, 50Hz
Over Voltage50V Fixed
MountingDin rail mounting
Power ConsumponLess than 4VA
Insulation2KV, 50Hz for 1min

In motors operating at low loads, failure of any one phase causes over voltages, which
may cause rupture of insulation leading to motor burn out. Low voltage will cause
synchronous motors to come out of synchronism at 75% of rated voltage. Induction
motors may stop when voltage falls below 70%. Over voltages may occur due to
defective voltage regulator, over speeding, caused by sudden drop in load on account of
this di-electric property deteriorates. In single phase supply low voltage may cause over
load on supply cable and thermal damage to insulation of windings.


Features:
  • Protection of synchronous and induction motors of any HP rating
  • Protection of generators, AMF switch Boards
  • Transformer feeder panel
  • Distribution boards
  • Voltage regulators
  • Protection f or UPS and single phase applications

Applications:
  • Protection of synchronous and induction motors of any HP rating
  • Protection of generators, AMF switch Boards
  • Transformer feeder panel
  • Distribution boards
  • Voltage regulators
  • Protection f or UPS and single phase applications
Request
Callback


Additional Information:

  • Item Code: VD0633
Yes! I am Interested
View PDF

Frequency Relay

Frequency Relay
  • Frequency Relay
Get Best Quote
Approx. Price: Rs 1,800 / UnitGet Latest Price

Product Details:

BrandProk dv's
Rated Voltage230V /415VAC
Auxiliary Supply85V-275V AC/DC
Frequency Setting Range40-60Hz. In steps of 0.1 Hz
Dimensions144 X 144 X 120 mm
Panel Cut Out137 X 137 mm

Generator and captive power plant Over frequency relay applied as backup protection for mechanical over speed devices to avoid damages to prime mover Under frequency relay applied to protect field winding from excessive current, over regulator from overload Servo controller and invertors


Features:
  • Dedicated microcontroller based
  • Accurate, reliable and tropicalized design
  • Continuous display of the measured frequency
  • User selectable upper frequency and lower frequency limits
  • User selectable trip timings
  • Uses SMPS for Auxiliary power i.e. Wide operating range for Auxiliary input 85-275C AC/DC

Applications:
  • Generator and captive power plan t.
  • Over frequency relay applied as backup protection for mechanical over speed devices to avoid damages to prime mover
  • Under frequency relay applied to protect field winding from excessive current, voltage regulator from over load
  • Servo controller an d invertors
Request
Callback


Additional Information:

  • Item Code: HILO2C
Yes! I am Interested
View PDF

Neutral Displacement Relay

Neutral Displacement Relay
  • Neutral Displacement Relay
Get Best Quote
Approx. Price: Rs 1,600 / PieceGet Latest Price

Product Details:

BrandProk dv's
Rated System Voltage415V AC
Voltage Setting Range(1-50) Volts in steps of 1V
Output Relay230VAC 5Amp /24VDC 5Amp
Display8 chars 2 line LCD with backlit
MountingFlush mounting

Prok Dvs an ISO 9001:2008 Company indigenously develops the power system protection relays and panel meters for power system. μP based Zero sequence voltage relays are the state of the art design, to monitor and protect the costly equipments against unbalance voltages.
The Relay Continuously monitoring all the three phase Line to Line Voltages, if any abnormal condition persists in the system internal Relay activated with predetermined set value of definite time.
The Unit Displays Line to Line Voltages on LCD display, Healthy and Fault /Trip status Information through LED Display.


Features:

  • Accurate and reliable measurement .of residual voltage.
  • Display of voltage magnitudes, using 8 character 2 line LCD
  • User friendly Setting Parameters through key pad switch
  • Wide range for Selection of residual voltage
  • User configurable Definite tripping time (DMT)
  • Fast tripping response(<500mS) when Phase and Neutral are Interchanged
  • Industrial Rugged design in Din rail mounting as well as Panel Mounting.
  • Healthy, Trip Status provided through LED visual indications.
  • Auto Reset provided on Healthy voltage resumption

Application:
  • Voltage Unbalance/Earth fault protection 
  • Protection of Equipments/Components against Phase and Neutral Interchange
Request
Callback


Additional Information:

  • Item Code: MPND
Yes! I am Interested
View PDF

DIN Mount

DIN Mount
  • DIN Mount
Get Best Quote
Approx. Price: Rs 2,200 / PieceGet Latest Price

Product Details:

BrandProk dv's
Rated System Voltage415V AC
Tripping CharacteristicDMT
Voltage Setting Range(1-50) Volts in steps of 1V
Trip Time Setting Range(1-30) Sec In steps of 1Sec
Output Relay230 VAC 5Amp /24VDC 5Amp

Prok Dvs an ISO 9001:2008 Company indigenously develops the power system protection relays and panel meters for power system. µP based Zero sequence voltage relays are the state of the art design, to monitor and protect the costly equipments against unbalance voltages. The Relay Continuously monitoring all the three phase Line to Line Voltages, if any abnormal condition persists in the system internal Relay activated with predetermined set value of definite time. The Unit Displays Line to Line Voltages on LCD display, Healthy and Fault /Trip status Information through LED Display.

Technical Specifications:

  • Trip Time when Ph. & Neutral interchanged: 500mS ( Approx)
  • Auto Reset provided on Healthy voltage resumption
  • AUX. Voltage: 85-275V AC/DC Universal input, 50-60Hz
  • Display: 8 chars 2 line LCD with backlit
  • LED: For Visual indications of healthy & Trip status.
  • Mounting: Flush mounting
  • Dimensions: FLUSH MOUNTING: 96x96x65 mm (w x h x d) +/- 1mm Tolerance
  • DIN MOUNTING: 79x93x73 mm (l x h x b) +/- 1mm Tolerance

Features:
  • Display of voltage magnitudes, using 8 character 2 line LCD
  • User friendly Setting Parameters through key pad switch
  • Accurate and reliable measurement .of residual voltage.
  • Wide range for Selection of residual voltage
  • User configurable Definite tripping time (DMT)
  • Fast tripping response(<500mS) when Phase and Neutral are Interchanged
  • Industrial Rugged design in Din rail mounting as well as Panel Mounting.
  • Auto Reset provided on Healthy voltage resumption
Request
Callback


Additional Information:

  • Item Code: DMPND
Yes! I am Interested
View PDF

Differential Relay

Differential Relay
  • Differential Relay
Get Best Quote
Approx. Price: Rs 2,200 / PieceGet Latest Price

Product Details:

Relay Type2 winding differential protection
BrandProk dv's
Rated Voltage250V AC
Design StandardsIEC 60255-22-[1-6],IEC 60255-5
CommunicationUSB+RS-485
Carry Capacity8A continuous

PDTPR series offers a multifunctional comprehensive smart protection solution for Feeder, Generator, Motor & Transformer segment. PDTPR family of protective relays are advance numrical relays that provide multi protection and monitoring with reliable and fast protection solutions in single unit

Features:

Three phase differential protection (87) with harmonic restrain

Three phase Instantaneous differential protection (87)

Event Recorder

Fault Recorder

DO programmable

Request
Callback


Additional Information:

  • Item Code: PDTPR
Yes! I am Interested
View PDF

Auxiliary Relay

Auxiliary Relay
  • Auxiliary Relay
Get Best Quote
Approx. Price: Rs 650.00 / NumberGet Latest Price

Product Details:

BrandProk dv's
Operating RangeDC - 70% to 120% of rated voltage. AC - 80% to 110% of rated voltage
Operating Time25 ms at rated voltage
TypePAR-1(PAR-H /PAR-S),PAR-2 & PAR-3
Rated Voltage24V,48V,110V,220V DC And 63.5V,230V AC
Operating Temperature-10 deg to +55 deg Celsius

The PAR type auxiliary relay are voltage operated relays
mainly used in control and alarm circuits.PAR series of relay are available in two basic models PAR-H and PAR-S. Auxiliary relay CAR-H is provided with hand reset contacts. CAR-S is self reset type. PAR series of relays are available in 2-elements & 3-
elements model. Each element can be energized separately.


Features:
  • Electro-mechanical design
  • Suitable for tripping, signaling in protection and control systems
  • Consistent and Repeat accuracy
  • High resistance to shock and vibration
  • Flexible user friendly standardized contacts arrangement
  • Hand reset or self reset contacts
  • Hand reset ag indication
  • Compact panel mounting case

Design:
  • The design of auxiliary relays electromechanical, hinged armature type. It has been ensured to have consistent electrical & magnetic qualities while designing the Armature, Yoke and the core materials. The coil is wound with high thermal rating to withstand the over heating due to continuous rating. Similarly, the contacts have been designed with silver/ cadmium oxide alloy to have superior contact rating with minimum wear and tear. It is ensured in the design and construction that the contact pressure is maximum to ensure superior contact rating. The contact spring is designed with superior phosphor-bronze spring quality material to have the positive exible movements. The relay element is provided with 3 Make and 3 Break contacts. In case of requirement, one Break contact can be connected in series with the relay element as a cut-off contact. This reduces the burden and saves the power from the battery. This facility is available with 1- element relay with Hand reset contacts only. The ag is always reset manual. The relay with self reset contacts can also be provided without ag.
Request
Callback


Additional Information:

  • Item Code: PAR1to3
Yes! I am Interested
View PDF

Master Trip Relay

Master Trip Relay
  • Master Trip Relay
Get Best Quote
Approx. Price: Rs 1,600 / UnitGet Latest Price

Product Details:

BrandProk dv's
TypePLR
Rated Voltage24V, 48V, 110V, 220V DC
Operating RangeDC - 70% to 120% of rated voltage.
Operating Time10 ms at rated Voltage
Operating Temperature-10 deg to +55 deg Celsius

The design of lockout relays is electro-mechanical, hinged armature type.It has been ensured to have consistent electrical & magnetic qualities while designing the Armature, Yoke and the core materials. The coil is wound with wires with high thermal rating to withstand the problems of over heating due to continuous rating. It is also ensured that the coil though rated for the very short time will tolerate the higher burden to ensure the faster operation. The series break contact will ensure the supply is cut off at a very short time of 10 ms breaking the inductive current.

Features:

Electro-mechanical design

Suitable for tripping, signalling in protection and control systems

Consistent and Repeat accuracy

High resistance to shock and vibration

Flexible user friendly Standardized contacts arrangement

Hand reset contacts

Hand reset flag indication

Compact panel mounting case

High speed with positive operation


Design:

The design of lockout relays is electro-mechanical, hinged armature type. It has been ensured to have consistent electrical & magnetic qualities while designing the Armature, Yoke and the core materials. The coil is wound with wires with high thermal rating to withstand the problems of over heating due to continuous rating. It is also ensured that the coil though rated for the very short time will tolerate the higher burden to ensure the faster operation. The series break contact will ensure the supply is cut off at a very short time of 10 ms breaking the inductive current.

Request
Callback


Additional Information:

  • Item Code: PLR
Yes! I am Interested
View PDF

Microprocessor Based,Digital ELR, 30mA-3A

Microprocessor Based,Digital ELR, 30mA-3A
  • Microprocessor Based,Digital ELR, 30mA-3A
Get Best Quote
Approx. Price: Rs 3,500 / UnitGet Latest Price

Product Details:

BrandProk dv's
DimensionsFlush 96 x 96 x 70mm Din80 x 94 x 76mm ( W x H x D )
Current Setting Range300mA-12A -( MPEL-01 ), 30mA-3.0 A - ( MPEL-02) (18- steps .)
Tripping Time0.0 Sec-5 Sec, Step size- 0.05Sec.
Auxiliary Voltage85-275V AC/DC 415V & 550V. AC

Prok dv’s brand earth leakage relay MPEL series uses the state of the art microcontroller based protection device to detect low level leakage due to degradation of insulation of phase conductors or high impedance faults. The main feature of MPEL is the continuous display of earth leakage currents of the power system. The unit is immune to external disturbance like harmonics and transients.


Features:
  • Microcontroller based compact design.
  • Continuous monitoring and display of set value and measured value of leakage current
  • 8 character 2line LCD displays with back lit
  • Test & Reset facility
  • CBCT connection monitoring facility
  • True Rms measurement of leakage current
  • Trip Circuit Failure indication (Optional) Default:Disabled
  • Serial RS 485 communication port with modbus protocol (optional)
  • Fault recording with date and time stampings, max up to 10 Faults (optional)
  • Tropicalised and rugged design
  • External test, reset, fault & healthy indication suitable for mining Application
  • High sensitive leakage current setting (5mA to 1.00A) (MODEL:MPELSPL)

Applications:
  • Frame leakage protection for LT control panels and switch boards.
  • Earth Leakage protection for Feeders / Motors / Generators / Transformers / Mobile Operating Equipments.
  • Protection for hazardous sensitive environments like Oil Refineries/Cement Plant/Chemical
  • Plant/Steel Plant / Pulp Industries and General Electrical Distribution.
  • Protection for Mining and Control Engineering.
Request
Callback


Additional Information:

  • Item Code: MPEL02
Yes! I am Interested
View PDF

DIN, 5%-80% Microprocessor Based Digital EFR

DIN, 5%-80% Microprocessor Based Digital EFR
  • DIN, 5%-80% Microprocessor Based Digital EFR
Get Best Quote
Approx. Price: Rs 4,500 / UnitGet Latest Price

Product Details:

BrandProk dv's
Frequency50Hz
Auxiliary Voltage85-275 V AC/DC or 50-550V AC/DC
High Set(0.5 -16) In.,in steps of 0.1
Contact Capacity8A@250V AC,8A@30V DC

The unit has LCD for displaying the fault current (at the time of tripping) and setting values (curves, plug setting & TMS). The LEDs are provided for indicating power ON status and to indicate IDMT or DEFINITE TIME or INSTANTANEOUS mode operation. Key pads are provided for easy setting/changing of the parameters.The design is tropicalised and rugged.


Features:

  • Compact
  • IDMT (4 IEC curves), Definite Time & Instantaneous
  • Wide setting ranges
  • Fully digital acquisition & processing of data
  • Wide operating voltages
  • LCD display of operated current & fault current
  • Rugged and Tropicalized design
Request
Callback


Additional Information:

  • Item Code: DMPEFSPL01
Yes! I am Interested

Numerical Draw-Out 3 Over Current & 1 Earth Fault

Numerical Draw-Out 3 Over Current & 1 Earth Fault
  • Numerical Draw-Out 3 Over Current & 1 Earth Fault
Get Best Quote
Approx. Price: Rs 4,000 / UnitGet Latest Price

Product Details:

BrandProk dv's
Frequency50Hz or 60Hz
Auxiliary Voltage Range85V - 275V AC/DC,21 - 130V DC
Operating Temperature- 5 deg to +55 deg C
Relay Rated Current1A or 5A user selectable

Prok dv's make PNA Type Idmt/Definite Time/Instantaneous Low-Set/High-Set Nondirectiona Numerical/Microprocessor Based Over Current Relay (Ocr) With Earth Fault Relay (EFR) or independent over current Relay (OCR) or earth fault relay (EFR). This is intended for protection application in medium voltage networks. These networks may have isolated or resistance impedance earthed or solidly earthed neutral points. Definite time over current relays are both suited for isolated systems and for use as back up to differential relays and distance relays. Inverse time relays (over current relays with various inverse times - current characteristics) are advantageous for interconnected systems and solidly grounded systems. Another tool for reducing the tripping time for faults near the source is to use the added instantaneous ( high set ) feature in the numeric relay .if the fault occurs during the setting of relay ,the relay shall operate / trip for the previously selected / default settings.


Features:

  • Three phase, low-set, non - directional Over current relay with inverse definite minimum time (IDMT) or definite time characteristics
  • RS-485 communication port with modbus protocol
  • Password protection
  • Three phase, high-set, non-directional Over current relay with instantaneous or definite time function
  • Low-set non -directional Earth fault Relay with inverse definite minimum time (IDMT) or definite time characteristics
  • High-set non-directional Earth Fault Relay with instantaneous time or definite time function
  • Modular Integrated Draw Out System for field adaptability and tropicalised design (MIDOS)
  • 2 line 16 characters industrial grade LCD with back-lit module for numerical display of setting values and measured values which is user friendly
  • Trips for default/previously selected curve if the fault occurs during settings of the relay
  • Membrane key pad for easy operation, dust proof front panel
  • Enabling /Disabling of High-Set
Request
Callback


Additional Information:

  • Item Code: PNA442D
Yes! I am Interested
View PDF

Numerical Draw Out 1 Earth Fault

Numerical Draw Out 1 Earth Fault
  • Numerical Draw Out 1 Earth Fault
Get Best Quote
Approx. Price: Rs 1,700 / UnitGet Latest Price

Product Details:

BrandProk dv's
Frequency50Hz or 60Hz
Relay Rated Current1A Or 5A User Selectable(In)
Auxiliary Voltage Range85V - 275V AC/DC,21 - 130V DC
Operating Temperature- 5 deg to +55 deg C

The micro-controller continuously monitors the magnitude of the phase current and the neutral current .whenever the phase current or the earth current magnitude exceeds the present value corresponding line / earth element will pick up and relay will trip after time interval calculated by the selected IDMT curves. Whenever the fault level exceeds the selected high set range, the relay will trip for high set, ignoring the selected IDMT curves. The timer logic is processed and after comparison with set time schedules, tripping signals are issued accordingly. There are two output relays , each output relay has two change over contacts either for alarm or tripping. The output relays are programmable. The relay rating (In) is field selectable either 1A or 5A. The relay has RS 485 com port which can be used with modbus protocol for communication purposes.


    Features:
    • Three phase, low-set, non - directional Over current relay with inverse definite minimum time (IDMT) or definite time characteristics
    • Three phase, high-set, non-directional Over current relay with instantaneous or definite time function
    • Low-set non -directional Earth fault Relay with inverse definite minimum time (IDMT) or definite time characteristics
    • High-set non-directional Earth Fault Relay with instantaneous time or definite time function
    • Modular Integrated Draw Out System for field adaptability and tropicalised design (MIDOS)
    • Password protection
    • 2 line 16 characters industrial grade LCD with back-lit module for numerical display of setting values and measured values which is user friendly
    • Enabling /Disabling o f High-Set
    • RS-485 communication port with modbus protocol
    • Relay test facility with relay trip & without relay trip
    • Definite time curve for both Phase & Earth along with optional user defined curve.
    • Low AC burden
    • Reliable auxiliary supply of wide range input of 18-85 or 85-275 volts AC or DC
    • Unique combination o f 50/51/50N/51N in a single gadget
    • High Drop-off/Pick-up ratio

    Applications:
    • Definite time curve for both Phase & Earth along with optional user defined curve.
    • Low AC burden
    • Reliable auxiliary supply of wide range input of 18-85 or 85-275 volts AC or DC
    • Non-Volatile memory for data retention and retrieval in the event of power failure
    • Unique combination o f 50/51/50N/51N in a single gadget
    • Consistent repeat accuracy
    • High Drop-off/Pick-up ratio
    • Poly carbonate front cover with external reset switch
    Request
    Callback


    Additional Information:

    • Item Code: PNA402D
    Yes! I am Interested
    View PDF

    Numerical Digital Voltage Relay with USB

    Numerical Digital Voltage Relay with USB
    • Numerical Digital Voltage Relay with USB
    Get Best Quote
    Approx. Price: Rs 1,800 / UnitGet Latest Price

    Product Details:

    BrandProk dv's
    Weight1 kg
    FrequencySuitable for 50Hz/60Hz
    ProtectionIP54
    Auxiliary Voltage24-260 V/24 V-360 V DC

    PNVNSP range of relays provide reliable and high
    performance protection. The PNVNSP is a relay for AC Voltage supervision with universal application, it protects the three phase network against over, under voltage, unbalance or earth faults in
    isolated networks. Beside the pure RMS value measurement
    of the line voltage the PNVNSP evaluates the symmetrical
    components (U1, U2 & U0 sequence system). By evaluating
    these components relay PNVNSP can detect the phase
    sequence, voltage unbalance and earth faults.


    Features:
    • Numeric DSP technology based relay.
    • Two Groups of configuration parameter.
    • Off line Trip Test mode
    • Single Phase/Three Phase selection
    • Front IP54 transparent dust cover
    Request
    Callback


    Additional Information:

    • Item Code: PNVNSPCS
    Yes! I am Interested
    View PDF

    Microprocessor Based Under/Over Voltage Relay 3W

    Microprocessor Based Under/Over Voltage Relay 3W
    • Microprocessor Based Under/Over Voltage Relay 3W
    Get Best Quote
    Approx. Price: Rs 4,500 / UnitGet Latest Price

    Product Details:

    BrandProk dv's
    Aux Voltage85 to 275V A C/DC
    IndicationDisplay of the Magnitude and nature of fault by LCD an d LED indication for relay trip
    Model Dimension144x144x120mm [H x W x D]
    Cut Out Dimension137 mmx137mm

    Prok dvs make Ac Digital Microcontroller Based Definite-Time Under Voltage (Uv) And Over Voltage (Ov) Relay / Line Voltage Monitor (LVM) is a microcontroller based voltage monitoring and supervision relay for polyphase system. It can monitor both under voltage (uv) and over voltage (ov) conditions in the system. Both under voltage(uv) & over voltage(ov) conditions are associated with definite time tripping characteristics. It has wide setting range or OV&UV settings and also wide range of operating time on the occurrence of fault condition. Digital Microcontroller Based Definite-Time Under Voltage (Uv) And Over Voltage (Ov) Relay / Line Voltage Monitor (LVM) provides wide range of time delay for healthy resumption of the operating voltage.


    Features:
    • Site selectable system voltage
    • Continuous display of the measured voltage parameter
    • 16 character 2 line LCD display with back-lit
    • Accurate reading for balanced and unbalanced load
    • Wide range of auxiliary input for both AC & DC
    • Independent contacts for both Under & Over voltage
    • Self reset & site selectable reset gap
    • Built in fixed instantaneous Under & Over voltage highest trip
    • Tropicalized design using micro controller & Ideal for industrial environment
    Request
    Callback


    Additional Information:

    • Item Code: LVM11A
    Yes! I am Interested
    View PDF

    Microprocessor Based Over Voltage Relay 3W

    Microprocessor Based Over Voltage Relay 3W
    • Microprocessor Based Over Voltage Relay 3W
    Get Best Quote
    Approx. Price: Rs 2,000 / UnitGet Latest Price

    Product Details:

    Aux Voltage85 to 275V A C/DC
    BrandProk dv's
    Cut Out Dimension137 mmx137 mm
    Model Dimension144x144x120 mm [H x W x D]
    Over Voltage Trip Me70% to 99% in steps 1% Site selectable

    Prok dvs make AC Digital Microcontroller Based Definite-Time Under Voltage (UV) And Over Voltage (OV) Relay / Line Voltage Monitor (LVM) is a microcontroller based voltage monitoring and supervision relay for polyphase system. It can monitor both under voltage (UV) and over voltage (OV) conditions in the system. Both under voltage(UV) & over voltage(OV) conditions are associated with definite time tripping characteristics. It has wide setting range f or OV&UV settings and also wide range of operating time on the occurrence of fault condition. Digital Microcontroller Based Definite-Time Under Voltage (UV) And Over Voltage (OV) Relay / Line Voltage Monitor (LVM) provides wide range of time delay for healthy resumption of the operating voltage.


    Applications:

    • Site selectable system voltage
    • Continuous display of the measured voltage parameter
    • 16 character 2 line LCD display with back-lit
    • Accurate reading for balanced and unbalanced load
    • Wide range of auxiliary input for both AC & DC
    • Independent contacts for both Under & Over voltage
    • Self reset & site selectable reset gap
    • Tropicalized design using micro controller & Ideal for industrial environment

    Applications:
    • Monitoring & Supervision of Under and Over voltage in power generating plants & distribution system
    • To protect Generators & AMF switch boards
    • For protection of synchronous & induction motors
    • For transformer feeder panel
    • Protection for capacitor control panels
    Request
    Callback


    Additional Information:

    • Item Code: LVM03A
    Yes! I am Interested
    View PDF

    Microprocessor Based Static ELR, 30-3000mA Relay

    Microprocessor Based Static ELR, 30-3000mA Relay
    • Microprocessor Based Static ELR, 30-3000mA Relay
    Get Best Quote
    Approx. Price: Rs 1,350.0 / NumberGet Latest Price

    Product Details:

    BrandProk dv's
    Mounting TypeFlush / Din
    Input Auxiliary Voltage110V,230V,415V,550V AC 50Hz 48V,& 220V VDC
    Tripping TimeVariable 0.15 - 3 sec,Fixed 100 millisec,500 millisec,1 sec & 3 sec
    Contact Rating8 Amps/ 250V AC/ 8 Amps,30 V DC

    Prok dv's make Static Earth Leakage Relay (ELR) with Core Balance Current Transformer ( CBCT
    / ZCT) are used to detect the leakage current in an Electrical Power System. Static Earth
    Leakage Relay (ELR) Transmits a signal to activate the trip coil of the MCCB/ACB/OCB
    CONTACTOR in the event of Earth leakage, resulting in automatic isolation of the electrical
    power system. Static earth leakage relay (ELR) and core balance current transformer (CBCT /
    ZCT) have been widely used and accepted because these have field adaptability and are
    economic.


    Features:
    • Consistent reliability with accuracy.
    • Fixed or variable current sensitivity by Dip Switch selection
    • LED’s for visual indication of fault.
    • High Barrier connector at rear for easy termination and safety standards.
    • Tamper proof polycarbonate cover in the front.
    • Test & Reset Facility for testing healthiness of the relay

    Applications:
    • Frame Leakage protection for L.T. Control Panels and switch boards.
    • Earth Leakage protection for Feeders / Motors / Generators / Transformers / Mobile Operating Equipments.
    • Protection for hazardous sensitive environments like Oil Refineries/ Cement Plant/Steel Plant /Chemical Platforms/Pulp industries and General Electrical Distribution.
    • Protection for Mining & Control Engineering
    Request
    Callback


    Additional Information:

    • Item Code: DEL05
    Yes! I am Interested
    View PDF

    5%-80% Microprocessor Based Static EFR DIN

    5%-80% Microprocessor Based Static EFR DIN
    • 5%-80% Microprocessor Based Static EFR DIN
    Get Best Quote
    Approx. Price: Rs 2,500 / UnitGet Latest Price

    Product Details:

    BrandProk dv's
    Frequency50Hz
    Auxiliary Voltage110 V/230 V/415 V/550 V,AC
    Operating Temperature0 deg C to + 55 deg C

    Specification:

    Neutral or Summation CT Rated Current-In - 1A or 5A (Factory Set)

    Burden on CT -


    Features:

    Static Device

    Compact, Reliable with Aesthetic Value

    Rugged, Robust and Tropicalised design

    Consistent repeat accuracy

    Wide Current Operating range

    LED Indication for Healthy & Fault Status

    Manual Reset & Low Burden on CT Secondary

    Request
    Callback


    Additional Information:

    • Item Code: DEFSPL
    Yes! I am Interested

    300mA-30A Microprocessor Based Digital ELR

    300mA-30A Microprocessor Based Digital ELR
    • 300mA-30A Microprocessor Based Digital ELR
    Get Best Quote
    Approx. Price: Rs 2,200 / PieceGet Latest Price

    Product Details:

    BrandProk dv's
    Current300 mA-30 A
    Voltage220 V
    Frequency50 Hz

    Description:

    • Prok dv's make Earth Leakage Relay (ELR) MPEL series uses the state-of-the-art, Digital microprocessor/micro controller based protection device to detect low level leakage due to degradation of insulation of phase conductors or high impedance faults.The main feature of Digital microprocessor/microcontroller Earth Leakage Relay (ELR) continuous display of earth leakage currents of the power system. The unit has immunity to external disturbance like harmonics and transients.

    Specification:
    • Microcontroller based compact design
    • Continuous monitoring and display of set value and measured value of leakage current
    • 8 character 2line LCD displays with back lit
    • Test & Reset facility
    • CBCT connection monitoring facility
    • True Rms measurement of leakage current
    • Trip Circuit Failure indication (Optional) Default:Disabled
    • Serial RS 485 communication port with modbus protocol (optional)
    • Fault recording with date and time stampings, max up to 10 Faults (optional)
    • Tropicalised and rugged design
    • External test, reset, fault & healthy indication suitable for mining Application
    • High sensitive leakage current setting (5mA to 1.00A) (MODEL:MPELSPL)
    Request
    Callback


    Additional Information:

    • Item Code: MPELSPL02
    Yes! I am Interested
    View PDF

    5%-80% Microprocessor Based Static REFR DIN

    5%-80% Microprocessor Based Static REFR DIN
    • 5%-80% Microprocessor Based Static REFR DIN
    Get Best Quote
    Approx. Price: Rs 2,200 / UnitGet Latest Price

    Product Details:

    BrandProk dv's
    Frequency50 Hz/60 Hz
    Universal Auxiliary Supply85-275 V AC/DC
    Pick Up Accuracy+/-12.5 %

    The application of powerful microprocessors Digital Microprocessor Based Restricted Earth Fault Relay (REFR) opens a new chapter for power system protective relaying. The digital processing of measured values and the ability to perform complex arithmetic and logic operations, give digital protection relays significant performance and flexibility improvements over their traditional analogue counterparts. Additional advantages - very small power consumption, adaptability, self-supervision, smaller physical construction and selectable relay characteristics - all combine to allow the implementation of accurate and highly reliable protection schemes at a significantly reduced financial burden.


    Features:
    • Microprocessor Based Design
    • Wide Setting Ranges
    • Rugged and Compact Design
    • 8 Character Back-lit LCD
    • Display of Fault current
    Request
    Callback


    Additional Information:

    • Item Code: DMPREFR
    Yes! I am Interested

    Microprocessor Based Over Voltage Relay 4W

    Microprocessor Based Over Voltage Relay 4W
    • Microprocessor Based Over Voltage Relay 4W
    Get Best Quote
    Approx. Price: Rs 4,500 / UnitGet Latest Price

    Product Details:

    BrandProk dv's
    Aux Voltage85 to 275V A C/DC
    Under Voltage Setting Range0-30sec in steps of 0.1sec 1% to 5% o f Un in steps of 1%
    Model Dimension137 mmx137mm

    All the line voltages are monitored and sensed simultaneously using three independent scale down potential transducer this low level ac signal is subjected to signal condition, which includes surge suppressors and harmonic filter, filtered signal is fed to the ADC of the industrial grade pic micro controller, When the sensing voltage level exceeds the user set value f or under or over voltage, Digital Microcontroller based definite-time under voltage (uv) and over voltage (ov) relay/line voltage monitor(LVM) gives an output signal in the form of relay change over for tripping/alarming.


    Features:
    • Site selectable system voltage
    • Continuous display of the measured voltage parameter
    • 16 character 2 line LCD display with back-lit
    • Accurate reading for balanced and unbalanced load
    • Wide range of auxiliary input for both AC & DC
    • Independent contacts for both Under & Over voltage
    • Self reset & site selectable reset gap
    • Built in fixed instantaneous Under & Over voltage highest trip
    • User friendly setting modes using key pads
    • Low power consumption
    • Tropicalized design using micro controller & Ideal for industrial environment
    Request
    Callback


    Additional Information:

    • Item Code: LVM03
    Yes! I am Interested
    View PDF
    X

    Explore more products



    Reach Us
    Bharathesh (CEO)
    1st Floor, No. 136 5th Main Road, Nadi Gruha, Chamarajpet, Bangalore Urban
    Bengaluru- 560018, Karnataka, India



    Call Us

    Share Us

    F GT L


    Send E-mailSend SMS